Where do you want to go

Wednesday, November 26, 2008

Cathedral Windows progress on color

some of the color blocks for cathedral windows.
I have been cutting color squares for my cathedral windows quilt; they are sizes 6 1/2 inches square (can also be cut 4 1/2 inches square if you are accurate (if not, somewhere between 4 1/4 and 4 1/2) depending how you sew it together) and 2 1/2 inches square. There are actually two places on the block you can add color. I want to add it to both spots. Once I have everything cut, I will make the second half of the tutorial. I have about 1/2 cut now and hope to have it all cut by Thanksgiving. This has become quite the stash-scrap buster which I am glad of because I have tons of scraps in tons of boxes. This project has emptied a 16-gallon tote of colored scraps; that is so cool to me. That isn't even counting all the white fabric used which was yards and yards and yards of fabric. I may use the scraps from this quilt to make a strip quilt as well, because I now have lots of pieces of fabric that are long and skinny, less than 2 1/2 inches wide (just not in the way that is shown in the link. I don't want to sew through paper because that wrecks needles). So, I may just get two quilts out of this.

Tuesday, November 25, 2008

Tatted Edging #16 in 25 motif challenge

Here is the newest piece in the 25 motif tatting challenge.
up close
I broke my shuttle while tatting this. Don't ask me how because I don't really know except that maybe I dropped it a few times too many. You can't tell in the photo, but it is broken right in half through the post (unless you are a tatter and know that the ends are supposed to touch and not have a big space there).

yards

Thursday, November 20, 2008

Part 1:tutorial Cathedral Windows background

cathedral windows quilt tests
After trying about five different ways to assemble this block I think I found the one that works best for my style and personality by using aspects of all the different ways I have tried. So I will do a little tutorial here in case someone else likes this style, then they can use it too. You can use this technique with either machine or hand piecing techniques, or you can do a combination of both.

Supplies:
  • Fabric for back ground and for color swatches
  • Scissors and/or rotary cutter and mat ( I like olfa mats and cutters, but use what you like)
  • Square ruler (9 1/2 inch square and a 2 1/2 inch square) and long ruler if using rotary system ( I like omnigrid for these items, but use what you like)
  • Sewing machine and supplies for it and/or needle and thread
  • Iron and ironing board
  • Glass head pins (so you don't melt the heads when ironing)
How To:
  1. Cut starting background block; mine are 9 1/2 inches square. I have an 9 1/2 by 9 1/2 omni grid ruler that is those exact measurements, so it's easy to cut a 9 1/2 inch wide strip out of yardage then use my square to cut the blocks. I cut them four thicknesses at one time. Cut all you need for the quilt so you if this takes you years to complete you do not run out of the same dye lot of fabric. If you keep all your seams accurate, your finished block is 4 1/2 inches and four together are 9 inches square. I am telling you this to help you figure out how many blocks you need to cut. For square layout, divide finished size of quilt by 4 1/2; for on-point layout, divide finished measurements by 6 for how many blocks you will need.
  2. Fold in half and sew both ends with a 1/4 inch seam allowance; this can be done on machine or by hand. I do this in assembly-line style; that way I do all of one side then all of the other.
  3. Open, match center seams, and pin .Sew this seam leaving about 1 to 1 1/2 inch opening for turning; this will not need to be sewn closed in the future because it will be hidden under another fold of fabric. I do this is assembly line fashion, also. Just pick up the needle and slide it over the spot to be left open, then go on with a long chain of blocks. This step can be done by hand, too; just place a knot at the start and stop of the stitching, two per block. No long chain system in hand piecing.
  4. Turn right side out by pulling entire block through the opening left; as you can tell, I have my children helping with this part (a 7- and 9-year-old turned most of my blocks. I did a few as well as my 11-year-old; it is a family thing here).Nnow all seams are inside the block; it is fine to leave the opening open.Pull out corners to a nice point. This is where having children is good; pass this part on to them to do this step. My 11-year-old and I did this part with the needle. I thought it might hurt the 7-year-old.
  5. Press blocks flat. You may not be able to tell in the photo, but I am using steam setting on my iron to do this faster. As you notice, I said press (not iron) because pressing is an up-and-down motion and fabric doesn't move; ironing is a side-to-side motion that moves the fabric and can make your blocks crooked. Do all blocks in assembly line; it is faster.
  6. Fold points to middle and pin. Notice my opening is still there and will be concealed as soon as I fold that flap down.and press blocks flat. Once again I am using a steam setting. You can skip this step of pinning if you want to stand at the iron and fold the corners down and iron instantly. This will save the time of pinning, but you have to be extra careful not to burn your fingers, especially if you are using steam. Either way works, just a personal preference thing.Do blocks in assembly line; it is faster. Check your blocks after pressing; they should measure 4 1/2 inches square if you have done everything correctly to this point. If you make sure you have all of these done before assembling, assembly goes faster.
  7. Now that you have everything nice and pressed,match up two blocks and match points. Pin these two points together (pointing at fold which is also the sewing line). Sew in pairs; I use a tiny stitch and I back stitch at the beginning and end of a rowthen sew in strips. For on-point (this picture shows six strips all laid out): If doing block/square layout, sew in sets of four to form squares: (This picture shows four sets of four.)
When you have a few rows sewn together, you can start filling in with color. In the next tutorial I will explain how to and where you can place color and how to fold and sew it.

DO NOT USE THIS PATTERN TO MAKE THINGS TO SELL FOR PERSONAL USE ONLY!!!!

  Part 2
I have posted the words just not the images since I can not access the quilt at the moment

Monday, November 17, 2008

Snakes


If you are into snakes, like our friend Robby is, then you may want to check out his web site. He only started it this last year, but if you do love reptiles it is the place for you. I was checking it out and boy are there a lot of them on his site. The photo to the right is one of his from his site. My kids love looking at snakes as has been shown in some old posts of them and their dad holding reptiles and reptile skins. So I figured other people might be interested in this, too. Since he is a family friend, stop by and say "Hi!" and that Wendy H. sent you.

Cathedral Windows layouts

There are basically two types of layout for a cathedral windows quilt; there is on-point and square. Of course you can do both with a tradition notched corner for posted beds. I went ahead and did a few in the next step so I could show layouts for this post. However, I am still actually working on the third seam; like I said, that is the long step. I am leaning toward the on-point version.

Square (example on flicker with color pieces added):
20a layout square
On-point (example on flicker with color pieces added):
20b layout on point

Saturday, November 15, 2008

Seam three, half way done

I had some help today from my three little girls while doing the third seam on the cathedral windows blocks. I pinned and chain-sewed, and the girls turned and pulled out the corners. We got about 1/2 of the blocks done; this is probably one of the slower steps.

My chain:
chain sewing

Littlest daughter's helping hands (7yrs) turning to right-side out:
youngest daughters hands

Middle daughter's helping hands (9 yrs) turning to right-side out:
middle daughters hands

Oldest daughter's hurt helping hands (almost 11 yrs) (she hurt her hands crashing on a bike at her cousins' house the other day). She is using a pin to pull out the corners after they have been turned right-side out:
oldest daughters hands
Where they stand at the moment:
sewn turned and ironed